Lens cases can be a significant source of microbial contamination. To help prevent eye infections, lens cases should be cleaned, rinsed and air dried every day, and replaced frequently. Use for storage during chemical disinfection only. Do not use during heat disinfection.

Before First Use: Rinse lens case and caps thoroughly with either saline solution or disinfecting solution, depending on the method of disinfection used. Chemical Disinfection: Clean and rinse lenses as directed by your eye care practitioner. Place the cleaned lenses into their correct chamber of the lens case, fill with fresh multi-purpose solution, and tightly close the caps. Leave the lenses in the lens case for a minimum of four hours. Important: If a lens well appears to be dry following the disinfection cycle, do not try to remove the lens. Refill the well with fresh saline or disinfecting solution, replace the cap tightly and allow 20-40 minutes for the lens to rehydrate. If a lens well continues to dry out, the case should no longer be used and should be replaced. For Good Lens Care: After each use, rinse both lens case and caps with either saline or a disinfecting solution depending on the method of disinfection used in your lens care regimen. Allow lens case and caps to dry thoroughly. Replace lens case every few months.